email : info@mercuryscientific.com   |   call : 203-364-5024

Technical Papers

Below is a list of some of the independent technical papers using our instruments. Mercury Scientific has no affiliation with the authors of the papers. The list includes a sampling of AM, pharmaceutical, food, and general flow applications

-

Model Prediction of Dry Mixing Time of Instant Porridge Products Based on Powder Flow Power Parameters at PT XYZ

  • UT - Food Science and Technology [2174]
    2021

Impact of atomization gas on characteristics of austenitic stainless steel powder feedstocks for additive manufacturing

  • Powder Technology,
    2021

Investigation of Mechanical Properties of Parts Fabricated with Gas- and Water-Atomized 304L Stainless Steel Powder in the Laser Powder Bed Fusion Process

  • The Journal of The Minerals, Metals & Materials Society
    2021

Characterization of recycled AISI 904L superaustenitic steel powder and influence on selective laser melted parts

  • Powder Technology
    2021

Fluidization stability vs. powder history of Geldart group C+ particles

  • Powder Technology
    2021

Influence of particle size on powder rheology and effects on mass flow during directed energy deposition additive manufacturing

  • Powder Technology
    2021

Internal Diameter Coating by Warm Spraying of Fine WC-12Co Powders (− 10 + 2 µm) with Very Short Spray Distances up to 10 mm

  • Journal of Thermal Spray Technology
    2021

THE INFLUENCE OF GRAIN SIZE DISTRIBUTION OF PA12 ON KEY STEPS OF THE POLYMER LASER SINTERING PROCESS

  • Solid Freeform Fabrication 2021:
    2021

Selective laser sintering of carbon nanotube–coated thermoplastic polyurethane: mechanical, electrical, and piezoresistive properties

  • Composites Part C: Open Access
    2021

Effects of polyamide-11 powder refresh ratios in multi-jet fusion: A comparison of new and used powder

  • Additive Manufacturing
    2021

A Method of Predicting Powder Flowability for Selective Laser Sintering

  • Solid Freeform Fabrication Symposium
    2021

Improvement of the flowability of fine yttrium oxide powders by microwave oxygen plasma and evaluation of the dense coating layer

  • Ceramics International
    2021

Effect of Particle size of monomodal 316L powder on powder layer density in powder bed fusion

  • Progress in Additive Manufacturing
    2021

A comparison of the spreadability and flowability of metal powders for AM applications

  • International Journal of Powder Metallurgy
    2021

Controlling factors determining flowability of powders for additive manufacturing: A combined experimental and simulation study

  • Powder Technology
    2021

A Through-Process Experimental Approach to Enable Optimization of Cold Sprayed Al 7075 Consolidation Performance

  • The Journal of The Minerals, Metals & Materials Society
    2021

Physical characteristics of ground switchgrass related to bulk solids flow

  • Powder Technology
    2021

Ageing of PBF‐Grade Poly (Phenylene Sulfide) Powder and its Effect on Critical Printability Properties

  • Macromolecular Materials and Engineering Macromolecular Materials and Engineering
    2021

How colloidal surface additivation of polyamide 12 powders with well-dispersed silver nanoparticles influences the crystallization already at low 0.01 vol%

  • Additive Manufacturing
    2020

Characterization of AISI 304L stainless steel powder recycled in the laser powder-bed fusion process

  • Additive Manufacturing Volume 32
    2020

A comparison of liquid binders for drum granulation of biochar powder

  • Powder Technology
    2020

Introduction of the energy to break an avalanche as a promising parameter for powder flowability prediction

  • Powder Technology
    2020

Improvement on flowability and fluidization of Group C particles after nanoparticle modification

  • Powder Technology
    2020

Investigation of the Performance of Fumed Silica as Flow Additive in Polyester Powder Coatings

  • Coatings
    2020

Integrating Particle Microstructure, Surface and Mechanical Characterization with Bulk Powder Processing†

  • KONA Powder and Particle Journal,
    2020

Pairing 316L AM Powder Feedstock with Mechanical Performance: What Really Matters.

  • Sandia National Lab.(SNL-NM)
    2020

Plasmonic Seasoning: Giving Color to Desktop Laser 3D Printed Polymers by Highly Dispersed Nanoparticles

  • Advanced Optical Materials
    2020

Impact of Flow Aid on the Flowability and Coalescence of Polymer Laser Sintering Powder

  • 2019 International Solid Freeform Fabrication Symposium
    2019

The effects of feed frame parameters and turret speed on mini-tablet compression

  • Journal of pharmaceutical sciences
    2019

On the development of powder spreadability metrics and feedstock requirements for powder bed fusion additive manufacturing

  • Additive Manufacturing
    2019

Investigation of low-pressure cold-gas dynamic spraying of polyamide-12 (PA12) on steel surfaces

  • IOP Conference Series. Materials Science and Engineering
    2019

Properties of Different Aluminum Oxide Powders and Ceramics Made from Them

  • Refractories and Industrial Ceramics
    2019

A surface characterization platform approach to study Flowability of food powders

  • Powder Technology
    2019

Selective laser sintering and multi jet fusion: Process-induced modification of the raw materials and analyses of parts performance

  • Additive Manufacturing
    2019

Powder fabrication and laser additive manufacturing of MoSiBTiC alloy

  • Intermetallics
    2019

Modified polymer matrix in pharmaceutical hot melt extrusion by molecular interactions with a carboxylic coformer

  • Molecular Pharmaceutics
    2019

Monitoring Magnesium Stearate Blending in a V-Blender Through Passive Vibration Measurements

  • AAPS PharmSciTech
    2019

Powder bed fusion of poly (phenylene sulfide) at bed temperatures significantly below melting

  • Additive Manufacturing
    2019

Understanding effects of process parameters and forced feeding on die filling

  • European Journal of Pharmaceutical Sciences
    2018

Fractal aspects of static and dynamic flow properties of pharmaceutical excipients

  • Journal of Pharmaceutical Innovation
    2018

Comparative evaluation of powder flow parameters with reference to particle size and shape

  • International journal of pharmaceutics, 2018
    2018

Time consolidation of skim milk powder near the glass transition temperature

  • International Dairy Journal
    2018

Process impact of elliptic smoothness and powder shape factors on additive manufacturing with laser sintering

  • 76nd Annual Technical Conference of the Society of Plastics Engineers
    2018

Warren-Spring based model for the shear yield locus of cohesive biomass powders

  • EPJ Web Conf
    2017

Powder flow testing: judicious choice of test methods

  • AAPS PharmSciTech
    2017

Particle agglomeration studies in a slurry bubble column due to liquid bridging: Effects of particle size and sparger design

  • Chemical Engineering Science
    2017

Powder flowability characterisation methodology for powder-bed-based metal additive manufacturing

  • Progress in Additive Manufacturing
    2016

Epoxy resin‐based ultrafine dry powder coatings for implants

  • Journal of Applied Polymer Science
    2016

An investigation of drum granulation of biochar powder

  • Powder Technology
    2016

Microstructures and Mechanical Properties of Selective Laser-Melted Metals with Different Processed Powder

  • European Congress and Exhibition on Powder Metallurgy
    2016

Compaction of chemically defined cell culture media increases its dissolution rate through an increase of solvent accessible surface area

  • Powder Technology
    2016

New approach to evaluate the lubrication process in various granule filling levels and rotating mixer sizes using a thermal effusivity sensor

  • Chemical and Pharmaceutical Bulletin
    2015

Characterization of moisture distribution in a fluidized bed

  • Measurement
    2014

The effect of moisture on the flowability of pharmaceutical excipients

  • AAPS PharmSciTech
    2014

Characterizing the bulk & flow behaviour of LS polymer powders

  • 2013 International Solid Freeform Fabrication Symposium
    2013

The Effect of Lubricants on Powder Flowability for Pharmaceutical Application

  • AAPS PharmSciTech
    2013

Powder flow in an automated uniaxial tester and an annular shear cell: a study of pharmaceutical excipients and analytical data comparison

  • Drug development and industrial pharmacy
    2013

Toward better understanding of powder avalanching and shear cell parameters of drug–excipient blends to design minimal weight variability into pharmaceutical capsules

  • International Journal of Pharmaceutics
    2013

Effects of anticaking agents and storage conditions on the moisture sorption, caking, and flowability of deliquescent ingredients

  • Food Research International
    2012

Developing Novel Methods to characterize Liquid Dispersion in a Fluidized bed

  • Electronic Thesis and Dissertation Repository
    2012

Investigation of the effect of impeller speed on granules formed using a PMA-1 high shear granulator

  • Drug Development and Industrial Pharmacy
    2012

The effect of the chopper on granules from wet high-shear granulation using a PMA-1 granulator

  • AAPS PharmSciTech
    2011

An Experimental Study of Spent Fuel Transport for On-Board Hydrogen Storage

  • ASME 2011
    2011

Advancing Pharmaceutical Dry Milling by Process Analytics and Robustness Testing

  • Journal of Pharmaceutical Innovation, Volume 5, Number 3
    2011

Investigation of the recyclability of powder coatings

  • Powder Technology 211
    2011

Effects of mild processing pressures on the performance of dry powder inhaler formulations for inhalation therapy (1): Budesonide and lactose

  • European Journal of Pharmaceutics and Biopharmaceutics 78
    2011

Advances in SLS Powder Characterisation

  • International Solid Freeform Fabrication Symposium
    2011

The Effect of the Chopper on Granules from Wet High-Shear Granulation Using a PMA-1 Granulator

  • AAPS PharmSciTech Vol 12, No. 4
    2011

The effects of caking on the dynamic flow of cohesive powders

  • PSA2011
    2011

Flowability characterization of drug-excipient blends using a novel powder avalanching method

  • European Journal of Pharmaceutics and Biopharmaceutics, Volume 74, Issue 2
    2010

On-line detection of bed fluidity in gas–solid fluidized beds with liquid injection by passive acoustic and vibrometric methods

  • Powder Technology
    2010

Transport characteristics of dehydrogenated ammonia borane and sodium borohydride spent fuels

  • International Journal of Hydrogen Energy, Volume 35 Issue 5
    2010

Onset of an innovative gasless fluidized bed - comparitive study on the fluidization of fine powders in a rotating drum and a traditional fluidized bed

  • Chemical Engineering Science 65
    2010

Dynamic avalanching accurately assesses flowability and quality

  • Pharmaceutical Technology Europe
    2009

Characterization of powder flow: Static and dynamic testing

  • Powder Technology, Volume 194 Issue 3
    2009

Audible acoustics in high-shear wet granulation: Application of frequency filtering

  • International Journal of Pharmaceutics, Volume 378, Issues 1-2
    2009

Copyright © 2023. All rights reserved.